To enter Test Mode:
- Power on the Medipen.
- Press and hold both the Decrease Depth (-) and Decrease Speed (-) buttons for 5 seconds. The Speed Indication Ring will flash and the Depth Indication will flash TST.
- Press the Primary Button to initiate Test Mode. During Test Mode:
- The Status LED will cycle through Red, Orange and Blue.
- All display elements will be shown to verify they are working correctly.
- The cartridge will cycle through all the depth variants, starting at the minimum depth and finishing at the maximum depth.
- The motor will cycle through all the speed variants, starting at the minimum speed and finishing at the maximum speed.
- Upon completion of the test, the motor will switch off and the Medipen will revert back to its previous depth and speed settings.